Pulsed Electromagnetic Field Therapy (PEMF)
PEMF therapy is based on more than 30 years of research carried out by scientists, researchers and many years of hands-on experience by thousands of doctors, chiropractors and therapists. Millions of treatments have already been successfully done with Curatron PEMF systems, in more than 80 countries worldwide, improving dramatically the quality of life for numerous people! Curatron PEMF systems offer full body penetration with superior speed of induction and changing frequencies to avoid body adaptation. The Curatron family offers high-energy coils for concentrated treatment up to 160,000 micro Tesla.
We offer several models which include the HT, Home Therapy System, the XP and XPSE, our advanced home system and entry level clinical systems. We also offer two models, the PC and Ultra Power 3D models that can be controlled by a Windows PC and offer more than sixty treatment protocols.
Chronic pain is often accompanied by decreased circulation to the affected tissues.
PEMF Therapy increases blood supply and circulation and promotes the healing of soft tissue while reducing oedema.
PEMF has been proved to be very effective for healing of delayed bone non-union and for improved fracture healing. It has been shown to be beneficial in case of problematic fractures and fractures with a large gap. Treatment can also be performed in case there are metal implants at the treatment site.
PEMF improves fitness and strengthens the body
Improved metabolism, increased tissue oxygen, and a better transport of nutrients supply the cells an optimum amount of energy increasing fitness and strengthening of the body.
In the course of continuous use of the Curatron Electro Magnetic system over several weeks and months, the energy level improves, health is stabilized and fitness increases. It is an ideal way to maintain your good health!
Auto Frequency Shifting
There is no other PEMF system that delivers up to 500 Gauss or 50 mT [milli-Tesla] over the entire body. Amazingly the pulsed electromagnetic field created with the 3D unit completely envelopes and penetrates the whole body in all 3 axes (length, width and height). For clinical applications where instant results are expected.
FLASH With Optional Paddle
Butterfly Coil with 3D
Gauss Mattress with 3D
HT Home Therapy System
WE HAVE THE POWER
This is a quick graphic showing the enormous gap between the Curatron Family and a few competitors. We have not listed all the competitors as many of them do not disclose the magnetic flux density of their systems. This table shows the maximum output when used with a full mattress. The Curatron 2000 3D for example has a 1600 Gauss 160,000 μT output when used with its Butterfly Coil. The Curatron 2000 XPSE and PC offer 1000 Gauss 100,000 μT when used with our Coil "B"
- Curatron 2000 3D (Max Output 500 Gauss, 50 mT or 50,000 μT)
- Curatron 2000 PC (Max Output 150 Gauss. 15 mT or 15,000 μT)
- Curatron 2000 XPSE (Max Output 150 Gauss, 15 mT or 15,000 μT)
- Curatron 2000 XP (Max Output 100 Gauss, 10 mT or 10,000 μT)
- Curatron 2000 HT (Max Output 70 Gauss, 7 mT or 7,000 μT)
- MAS Sport (Max Output 60 Gauss, 6 mT or 6,000 μT)
- BEMER 3000 (Max Output is less than 1 Gauss)
- QRS (Max Output is less than 1 Gauss)
Virtually all of our competitors compare themselves to the Curatron?
The confusion of numbers. This table hopefully will clear up some of the confusion in the numbers game. When one of our competitors says that they have High Power (Magnetic Flux Density) at 1000 μT or 1000 micro Tesla, they are saying 'we generate only 10 Gauss. The symbol 'T' is the universal symbol for Tesla which is 1 Weber per square meter. See not confusing at all.
|1 G||0.1 mT||100 μT||100,000 nT||100,000,000 pT|
|10 G||1.0 mT||1,000 μT||1,000,000 nT||1,000,000,000 pT|
|100 G||10.0 mT||10,000 μT||10,000,000 nT||10,000,000,000 pT|
|1,000 G||100.0 mT||100,000 μT||100,000,000 nT||100,000,000,000 pT|
The Bemer, iMRS, QRS and other low power (magnetic flux density) PEMF systems are just that. They are low power (magnetic flux density) systems. When it comes to pain relief, there simply is no substitute for power (magnetic flux density). We have created this page because we are somewhat tired of hearing that our competitors tell people that their low power (magnetic flux density) systems provide better treatment. Creating a high power (magnetic flux density) system is not an easy task and just because they have not or perhaps can't create high power (magnetic flux density) systems economically, they tell their customers that high power (magnetic flux density) is not needed.
Perhaps power (magnetic flux density) is an absolute necessity. Nothing moves without force or the application of energy and larger forces either move big thing or make smaller things move more quickly. Many of us drive cars with perhaps 50 to 75 brake horse power (magnetic flux density) and they are happy. Well I'm not! I prefer higher power (magnetic flux density) cars.
The Curatron is a high power (magnetic flux density) system and it is priced much the same as its competition, yes, we do have fewer bells and whistles but we outperform virtually all competitors. Ask yourself if the bells and whistles on the other systems enhance the system? The controls on the other systems can be confusing and for the most part simply offer no advantage of treatment power (magnetic flux density). Power (Magnetic Flux Density) penetrates the body more quickly and more completely. Power (Magnetic Flux Density) is indeed king!
Fewer bells and whistles make the Curatron easier to understand and operate and perhaps more importantly make it less prone to equipment problems. More buttons, more switches mean more failures.
|Amjo started selling Curatron 2000 systems early in this millennium, the year 2000 and in all of the years that we have been selling these systems has only experienced one failure on one system sold here in the USA. No other company has a better track record! and no other company in our business can make that claim.|
Let's highlight some basic numbers! If one uses the full mattress in each of the QRS, Quantron, Bemer etc, the table below illustrates the differences in power (magnetic flux density).
|Unit of Magnetic Flux Density||(mT)
|Curatron FLASH (Ringer System)||500||5000||500,000|
|Curatron 2000 3D||50||500||50,000|
|Curatron 2000 PC & XPSE||15||150||15,000|
|Curatron 2000 XP||10||100||10,000|
|Curatron 2000 HT(High Energy Programs) ***||7||70||7,000|
*** Note: The Curatron 2000 HT Low Energy Programs are roughly 10% of the values shown, the ones shown are for programs 5-9 (High Energy Programs)
For example the other systems with magnetic flux densities of less than one gauss in our opinion offers no therapeutic effect whatsoever. We offer units such as the Curatron 2000 PC when used with our Very High Energy Coil offers magetic flux densities of 1000 Gauss. These other systems simply do not come close.
Some Technical Stuff:
The efficacy of PEMF treatment is very much dependent of the applied output energy in combination with the "Speed of Induction" (Dp/dt) and the magnitude (~ amplitude) of the output signal. This is where the Curatron systems show their absolute superiority compared to any other system in the market.
The other makers make a point of having wave cycles that are square/saw-toothed instead of sinusoidal. How does the Curatronic system compare and if different, does that make a difference in its efficacy?
- All serious and independent double blind PEMF studies in the public domain are based on sinusoidal signals!
- It is technically much easier to generate non-sinusoidal wave forms - to obtain a higher amplitude - than a pure sinusoidal signal which needs to be "gated" by the pulsing frequency very precisely during zero crossing of the signal in order to generate fast rise times resulting in high energy transfer deep into the body.
Curatronic has been able to solve all technical problems in hardware and software to obtain a very, very fast speed of induction for very high magnitude signals, which is crucial for deep penetration into the body (even into deep bones). If e.g. the actual electromagnetic fields can be felt (with the help of the supplied test magnet), which is the proof of absolute penetration. Try this with the Bemer systems needing special measuring equipment, to show that there is a very little generated energy at all as you cannot even feel it with a test magnet!The Curatron systems simply generate much higher energy levels than the other systems.
Quick list of features!
- 5 Different models to choose from
- HT (Home Therapy)
- XP (Professional and Advanced Home System
- XPSE The Curatron 2000 XP with 50% more Magnetic Flux Density
- PC Clinical System with PC control
- 3D Advanced PC System with 500 Gauss Full Mattress
- Full body penetration
- Superior speed of induction
- Square gated sine wave carrier frequency
- Synchronized zero crossing pulses
- Low & high intensity
- Feel the pulses with a simple magnet
- Frequencies > 25 Hz
- Automatic frequency changing => no body adaptation
- Absolutely Superior for pain therapy
- Create & Save your own programs with PC software (PC and 3D Only)
- FullBody mattress 71" x 24"
- Travel Mattress (Developed for the US Ski Team)
- Therapy Pad 20" x 28"
- High intensity coil 700 Gauss with PC and 3D
- Very high intensity coil - 1000 Gauss with PC and 3D
- Lightweight aluminum handheld probe available
- Ease of use – no training required
- PC & laptop connection available in PC and 3D models
- Both Curatronic and Amjo are FDA Registered
- 5-Year extended warranty available.
- Fantastic value for money
- Pricing starts under $3000
Just dare to compare!
- Ask our competitors about their high energy coils (they don't have any)
- Ask our competitors about their therapy pad for your torso only (they dont have one)
- Ask our competitors about controling treatment with a PC (they can't do it)
- BTW: The Curatron 2000 3D is the only system available offering 50 mT (milli Tesla) 500 Gauss full body treatment!
I would like you to know how thrilled I am with our Curatron
You can feel the warmth during the sessions
My painful ulcerated athlete’s foot was healed up completely in only one day!
(Webmasters Note: Each of us is different and we respond differently to PEMF and many other treatments. We cannot say that this is a typical response from a single treatment.)
Our success rate is between 87-90% and we see remarkable results in our patients
The equipment works extremely well with lower back pain, OA and sciatic problems. I highly recommend the Curatron, we would not consider opening up our other centers with any other equipment than Curatron.
Sheila Hatfield. R.N.
After many years of suffering from very painful knees…
One more interesting observation: if I use the Curatron every day for 30 minutes my knees feel VERY good but when not using it for 3 days the pain gradually starts to return so I make sure I use the Curatron at least every other day.