Selecting your Curatron System

Sometimes, choosing the right system can be a challenge.

FLASH or HUMMERNow with the introduction of the FLASH system in 2017, Curatron customers have a choice between the FLASH and the true PEMF systems such as the Curatron 2000 HT, Curatron 2000 XP/XPSE, Curatron 2000 PC and the Ultra Power Curatron 2000 3D. We will try on this page to help you understand the similarities and differences so that you can make an educated choice. The chart at the bottom of this page lists many of the common needs and the recommended system.

Click here to see the selector chart at the bottom of this web page.

As a general rule, if you are looking for long term, usually permanent pain relief then the Curatron 2000 Family is what you should purchase. If you are looking for quick pain relief then the FLASH is what you should be looking at. If someone arrives at your clinic and needs quick, perhaps temporary relief then the FLASH or the Curatron 2000 3D Ultra are your optimal choices.

How to choose the right Curatron model for your applications?

Lots of confusion exists for the correct applications of the different PEMF technologies. On this page we have tried to explain your options. Personally, if I was a chiropractor, I would own a Ringer FLASH system and a true energy medicine device like the Curatron 2000 PC or Curatron 2000 3D. Please take your time ann read on carefully.

FLASH Technology!

The very high intensity of the PEMF Flash pulses or are extremely short electromagnetic pulses and each is less than a few hundred microseconds, or less than 1/1000 of a second.

Each individual very high-intensity pulse will fully penetrate the body, but mainly inside the coil location. Because this pulse is extremely short in duration the average quantity of energy transferred into the body is close to zero.

Whole body treatment is not possible because of the inherent localized ultrashort pulse effect. The use of the term Energy Medicine for this technology is misplaced because the quantity of energy inside each pulse is very low.

As a side effect of this high-intensity pulse technology, uncontrollable muscle contractions occur. These muscle contractions happen because the high induced electrical current inside the muscles trigger the electrical contraction function of the muscles.

This form of PEMF “pulse injection” can be compared to a “numbing-up” shot at the dentist before the drilling starts and then slowly wears off after a few hours.

For what can PEMF Flash technology be used? Mainly for very fast local pain relief lasting anywhere between hours and a few days. In case this technology is used for some minor energy transfer into to body, many long hours of low-intensity pulses would need to be used compared to true PEMF energy medicine technology.

TRUE PEMF OR HUMMER  TECHNOLOGY

For long term pain relief, the underlying source of the pain has to be treated. For this the Curatron 2000 PEMF systems technology should be used, because this not only does treat the source of the pain but in addition transfers into the human body a substantial quantity of energy and as such does treat the actual problem, resulting in long-term pain relief.

PEMF Energy Medicine (some call them oscillating or hummer PEMF devices)

For all other applications than immediate pain relief, the classic form of PEMF technology should be used.
This also includes long lasting pain relief in addition to all other applications (also mentioned elsewhere on this website).
The increase of cellular energy, or the increase of peripheral circulation, improve the oxygen uptake, strengthening of the immune system, detoxification, wellness, long lasting pain relief, athletic performance, general health etc. etc. are all excellent applications for the high quantity of energy medicine Curatron PEMF applications.

In this picture, which is a graphical energy comparison is presented to show the differences in energy quantity (contents) between PEMF Flash and PEMF Energy Medicine.

The bar contains the energy contents of the 4000 Gauss very fast and high-intensity pulses, while the blue contains the 500 Gauss energy contents of the “regular” PEMF pulses.

One can see that Flash technology is excellent for very fast pain relief because of the “numbing-up” effect, while the regular PEMF pulse energy excels in long lasting pain relief. This is because the result of the average healing energy quantity inducted into the body, which totals to numerous times more than the very short high-intensity pulses.


The Selector Guide below should help.

Curatron ModelFLASH3DPCXPSEXPHT
Clinical UseYesYesYesNo
Doctors, Chiropractors, etc.YesYesYesYes
Energy MedicineYesYesYesYesYes
Fast/Immediate Pain ReliefYesYes
Long Lasting Pain ReliefYesYesYes
ArthritisYesYesYes
FibromyalgiaYesYesYes
Back PainYesYesYes
OsteoporosisYesYesYes
Sports InjuriesYesYesYesYes
Fracture HealingYesYesYesYes
Athletic PerformanceYesYesYesYes
General HealthYesYesYesYesYes
WellnessYesYesYesYesYes
DetoxYesYesYesYesYes
Allround TherapyYesYesYes
Light General (Personal) TherapyYes
Parmeds ModelUltra 3DSuperPro SpecialProHome
0
Connecting
Please wait...
Send a message

We aren't online at the moment. Please leave a message for us and we'll reply just as soon as we can.

* Your name
* Email
Subject
* Describe your issue
Phone
Login now

Need more help? Save time by starting your support request online.

* Your name
* Email
* Describe your issue
Phone
We're online!
Feedback

Help us help you better! Feel free to leave us any additional feedback.

How do you rate our support?