513-885-0440 support@amjo.net


Curatron Ultra FLASH in Home Setting

The ULTRA-FLASH is the optimal choice for clinical use offering ultra high intensity impulse PEMF therapy.

This system has a dual applicator feature allowing 2 applicators to be used simultaneously.

The ULTRA-FLASH super high intensity PEMF system is electronically controlled by high voltage solid state semiconductor technology and no parts need to be replaced making the unit completely service free, like all other Curatron models.

​The Curatron ULTRA-FLASH unit has 10 internal computer controlled programs offering a wide choice for many treatment possibilities.


Maximum Intensity10,000 Gauss = 1,000 milli Tesla = 1,000,000 μTesla = 1.0 Tesla
Programs10 Built-In 30 Minute Programs (Optional Windows Software - Available)
Pulse Rate<1 - 5 PPS (Pulses Per Second)
Voltage115V/230V (Set at Factory)
Control Unit11.5” W x 10” D x 5” H (13.5 lb)
In the boxUltra Control Unit, Power Cord & Test Magnet
Warranty3 Years on Control Unit & 3 Months on Applicators
Available ApplicatorsLoop Coil, Figure 8 Coil, 7"x7" Pad, Full Body Mat
REMEMBER: Order at least one applicator with the Control Unit

Curatron Ultra-Flash-Intensities

Optional PEMF software for ULTRA-FLASH factory installed with original order only

In addition to the 10 ready for use programs the Curatron ULTRA-FLASH system can also be fully controlled through the optional USB connection of a Windows PC/Laptop computer with the special FLASH software. 

  • FLASH pulse frequencies with related intensities and timing for each pulsing stage are under direct command and control of the PC/Laptop program running under Windows 10 or 11.

  • Therapy protocols can be freely created by the user and can be saved in the database and then run fully automatic.

  • Unique programs can easily be created and saved e.g. a full automatic PEMF frequency sweep program which automatically runs through a series of frequencies during the therapy session.

  • User-friendly database for demographic patient data including treatment follow up.

  • Free notes editing.

  • Full report printing, including treatment history data, treatment time and accumulated treatment time.

  • Very easy installation without basic computer knowledge.

  • Pulse per second choices for each stage are: 0.6, 0.7, 0.8, 0.9, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 20, 25 ,33
  • Each stage can be programmed separately between 1 and 20 minutes and the total for all stages running in sequence to create a custom protocol is 99 minutes.
FLASH Software Custom
Naming Programs
FLASH Software Protocols
FLASH Countdown Timer