The author, that’s me Chris Cane has real doubts and you will not find Amjo recommending or discussing the use of the Curatron for treating Cancer. I do realize that there are many sites out there that make claims that are simply cannot be supported. That being said, I did happen upon a very interesting page at www.cancer.org where they discuss alternate treatments and therapies. This page can be found by clicking here. Some of the text from that article is shown below.
Square Wave Gated Sine Wave Carrier Frequency
The wave form generated and the power or magnetic flux density of our applicators is what sets us apart from all the others.
The Curatron waveform is unique and very difficult to create. Other systems use simple waveforms such as a simple square wave, a simple triangle wave or a a simple sawtooth wave. Each of those do not provide a high slew rate, rate of rise or Speed of Induction that is all too important in the world of PEMF. (more…)
The combination of PEMF1 and LLLT2 targeted Phototherapy enhances the efficacy of each of the individual technologies with instantaneous and superior therapy results.
Applications for highly effective treatment of: (more…)
“I liked the shaver so much, I bought the company” (( The words of Victor Kiam when he bought Remington Products ))
In my case, “I liked the Curatron 2000 XP with the “A” Coil so much that I went out and bought myself a “B” Coil.
Yeah, That’s me the author of this post and a co-owner of Amjo. It was October 11, 2011, this was day 283 of 2011.
It was Columbus Day and it was also Thanksgiving Day in Canada. Why do I mention that? Well I’m a Canuck and Cheryl and I went to Columbus on Columbus Day, which in itself seems ironic. We really went to celebrate Canadian Thanksgiving with our daughters, Jody the one who lives in Columbus (She’s the JO part of our company name. Our other daughter Amy and family were also visiting from their home near Cleveland. (Amy is the AM part of our company name). If you’re curious then you can learn a little more about AMJO (( Amjo Corp is our Small Business based near Cincinnati Ohio. Amjo Corp opened its doors in May of 1998 )) at www.amjo.net.
One of the contentious areas and perhaps the least understood regarding PEMF Technology has always been the waveform of the pulses generated by the PEMFT machine. The easiest wave forms to create are triangular and sawtooth waves. The generation of sinusoidal waves is always an engineering challenge requiring advanced circuitry and design. Triangular, Sawtooth and Square waves generate the most electrical noise and do cause the greatest amount of interference on your radio and television sets in the proximity of the PEMF device. We’ll discuss electrical noise in another posting soon. The waveform that transfers the greatest mount of energy to our cells is the sine wave. We tend to recognize sine waves when we hear them as single pure tones with no raspy noise associated with them.
Create Magnetic Flux Density of 1,000 Gauss for less than $6K?
Sure! Why not?
It’s not as hard as you might think, if you know what to do and why to do it. It started a few months ago when I called Ben Philipson at Curatronic and asked him if there was a way to get 1000 Gauss from the Curatron 2000-XP? I already knew that when the XP was modified to add a data communications circuit board and some special software that the XP was transformed into a C-2000-PC and the Curatron 2000 PC could generate 1000 Gauss (100,000 μT ) with the Coil “B”.
Fortunately, I never get confused and then I forget that I don’t get confused and then confusion happens. It all started when my mother said to me “I could not fail to disagree with you less.”
This post was not written to obfuscate, becloud, muddy or confuse. It just ended up that way.
From a white paper by Ben Philipson, the inventor of the Curatron Systems.
Only Pulsed electromagnetic fields (PEMF) influence cell behavior by inducing electrical changes around and within the cell
The magnetic field strength of a magnet is related to its size and composition, which determines the depth of penetration of the magnetic fields. There are many therapeutic systems on the market which use permanent magnets made of different materials. These manufacturers often claim field strengths of 4,000 gauss and higher. These values are however not relevant at all, since the measured field strengths of these magnets range from 310 gauss to 2,200 gauss at the surface, at 1-inch distance around 10 Gauss at 3-inch distance absolutely nothing! 
I had heard the term “Speed of Induction” many times over the years and I was having a challenge trying to explain it to myself and others, so I decided to ask Ben Philipson, the creator, designer and my guru for the Curatron 2000 products.
When I asked Ben, he explained it as follows:
In the last two weeks, we’ve sold a couple of systems to folks with Fibromyalgia and it’s gratifying that both of the sales come from referrals. In one case, the customer had actually borrowed a system we sold last year to a person suffering from neurosarcoiditis and rheumatoid arthritis. After eleven treatments with her friend’s Curatron 2000 HT, she called and ordered one for herself.